Advanced

Barco FLM R20 DLP HD Event Projector 20000 ANSI Lumens - MSRP $105,900

  • Fulfilled by a Marketplace Seller
TIME LEFT
CLOSED ON 09/11/2013 4:30 PM EST
Views
Bids
Bidders
Watching
294
-
-
0
LOCATION
MINNEAPOLIS, MN
CONDITION
USED
AUCTION ID
6684456
TOTAL WEIGHT
320.00 POUNDS PER LOT
QUANTITY IN LOT
1 (QUANTITY VARIANCE 2% )
BUYER'S PREMIUM
5%
AUCTION TYPE
SEALED BID
ATTENTION: THIS IS A SEALED BID AUCTION. All bids will remain confidential. Bidders have the ability to increase their bid at any time. Lowering a bid is not permitted. By bidding, you are entering into a legally binding contract to purchase this lot if you are the winning bidder.
There is no proxy bidding in a sealed bid auction.

Barco FLM R20 DLP HD Event Projector 20000 ANSI Lumens - MSRP $105,900


    Barco R9004430 Model FLM R20+ DLP HD Event Projector, 20000 ANSI Lumens, native 1600 x 1200 resolution, Contrast ratio 1800:1 (full field), 99 kg (220 lbs)
    MSRP $105,900

    What's included:
    Projector, Lamp and Lens, Remote Control and Power Cord
    Condition: ***USED GOOD CONDITION***
    ***FULLY TESTED AND OPERATIONAL***

    HIGHLIGHT:
    Barco FLM R20+
    SN 1423704
    Manufactured: August 2006
    Lamp: SN R98524535
    264 Foot Candles
    472 Hours
    Projector Hours: 6,217
    FEATURES:
    Ultra bright 20K stunning images
    high contrast 3-chip DLP engine
    true native SXGA+ resolution
    20,000 Center
    contrast ratio of 1800:1
    Low Total cost of ownership
    Sealed engine with constant image quality over time
    Projector designed for high resistance against external contamination
    Extended lamp warranty (750 hours)
    Extremely good lamp maintenance (typical 1,000 hrs)
    The lens range (TLD HB) of the industry leading Barco SLM and RLM projector series can be re-used on the FLM series, meaning no re-investment in new lenses.
    Purpose built for demanding rental & staging applications
    Fully sealed optics
    Easy to set-up and install
    Easy to service
    Easy to transport
    Removable lamp house, power supply & electronics
    Low video delay (broadcast live events)
    Fit for any Widescreen & Creative application
    High brightness projection at 20,000 lumens
    High-Contrast Mode (2400:1) feature enables you to make a trade-off between brightness and contrast, depending on your application.
    Low video delay, very important when broadcasting life events
    Ultimate solution for projection on multiple screens and special surfaces
    New Projector Toolset Software
    The FLM comes with standard Projector Toolset software, offering basic control, diagnostics and other features (e.g. a lens program). Additional software plug-ins can be offered as an option delivering added functionality for multi-screen applications, advanced settings control, etc. A user friendly GUI (Graphical User Interface) ensures easy control.
    SPECIFICATIONS:
    Light Output
    18.000 ANSI Lumen
    20.000 Center Lumen
    Resolution
    1400 x 1050 (native)
    Brightness uniformity
    > 90% for the total screen
    Contrast ratio
    1800 : 1 (full field)
    High contrast mode:
    2400 : 1 (full field)
    Display
    3 Chip DLP SXGA+ (resolution of 1400 x 1050 pixels (aspect ratio 4:3)).

    Features
    Picture in picture
    Seamless switching with effects
    Standard light shutter
    Rigging point
    Carrying handle
    High contrast mode
    P7 color processing
    Picture-in-picture
    2 sources simultaneous
    Inputs

    Modular inputs:
    Configurable 5 cable (BNC)
    DVI
    (HD)SDI (+ loop through)
    Outputs
    HDSDI/ SDI loop out
    Communication
    1x RS-232C IN (D-9 connector)
    1x RS-232C OUT (D-9 connector)
    1x RS-232C IN (XLR connector)
    2x prop. protocol (RJ45 connector)
    mini-jack for wired remote control
    Compatibility
    All current video sources (PAL, SECAM, NTSC) in Composite, S-VHS, Component or RGB formats
    All currently proposed HDTV, extended and improved television standards (1080i, 720p)
    All computer graphics formats from VGA, SVGA, XGA, SXGA, full HD, UXGA to QXGA
    Most Macintosh computers
    Electronic workstations with a resolution up to QXGA (2048 x 1050 pixels at 60 Hz)
    Most computer sources with a pixel clock up to 300 MHz
    DVI sources up to DC2K (2048x1080)
    Input source compatibility
    Max. input: up to QXGA (2048 x 1536)
    Screen size
    From 1-12m / 3-39ft.recomended
    Scan Frequencies Pixel clock >162Mhz (QXGA 60hz)
    Network connection
    10/100 base-T
    On board display server
    Ethernet control standard remote control projector over ethernet via Projector Toolset
    Ambient Temperature Max 40C (104F)
    Lamp
    3 kW Xenon
    Lamp warranty: 750 hrs
    Lenses
    Lens Order nr
    TLD (HB) 0.8 R9842040
    TLD (HB) 1.2 R9840770
    TLD (HB) 1.6 - 2.0 R9842060
    TLD (HB) 2.0 - 2.8 R9842080
    TLD (HB) 2.8 - 5.0 R9842100
    TLD (HB) 5.0 - 8.0 R9842120
    Lens Shift
    Vertical: -10% to +110%
    Horizontal: -50% to +50%
    (small differences occur per lens type)
    (short throw lenses have less shift)
    Lens encoders
    On zoom and focus (with TLD lenses)
    Throw Ratio
    Lens Throw ratio
    TLD (HB) 0.8 0.75
    TLD (HB) 1.2 1.1
    TLD (HB) 1.6 - 2.0 1.45 - 1.85
    TLD (HB) 2.0 - 2.8 1.85 - 2.55
    TLD (HB) 2.8 - 5.0 2.55 - 4.55
    TLD (HB) 5.0 - 8.0 4.55 - 7.3
    ScenergiX
    Standard horizontal and vertical electronic edge blending
    Sealed DLP core
    Standard
    Dust filters
    Dense, high quality microfilters available as spare kit, in a 6-pack & 24-pack
    Noise Level
    56 dBA (at 40C)
    Mains Voltage 200 - 240 V
    Power consumption 3600 W
    Power Dissipation max 11953BTU/h
    AC power
    190V - 255V
    (50 Hz - 60Hz)
    Weight 99 kg (220 lbs)
    Dimensions WxLxH
    707 x 1025 x 548 mm
    (27.8 x 40.3 x 21.5 inch)
    Safety Regulations
    Compliant with UL1950 and EN60950
    Electromagnetic Interference
    complies with FCC rules & regulations, part 15 Class A and CE EN55022 Class A


    Please View the additional pictures by clicking the "View all photos" tab.

    For an explanation on the various condition codes used on Liquidation.com please Click Here








TOTAL WEIGHT
320.00 lbs per lot / 0.00 pounds per lot dimensional weight
MINIMUM SHIPPING FEE
$103.65
SIZE CLASSIFICATION
PALLET 100
AVAILABLE LOT(S)
1
SHIPPING RESTRICTIONS
UNITED STATES OF AMERICA

The following Terms and Conditions are in addition to our User Terms and Conditions Agreement, which can be found at https://www.liquidation.com/register/registration/terms

Payment by the winning bidder must be received within 2 business days after the close of the auction. If payment is not made within 2 business days, the transaction may be canceled with a fee of 15% of the auction lot price or $200, whichever is greater, and your account may be suspended.

The payment for the auction consists of the final winning bid, the Buyer's Premium, all shipping charges, and all applicable taxes. Unless otherwise stated in the auction, our standard Buyer's Premium is 5% of the final bid price. Shipping charges do not have any direct correlation with the purchase price. If you are unaware of these costs, please request a shipping quote.

Sales tax will be charged on any transaction where either the goods are shipped to a location in Arizona, California, Indiana, Minnesota, Nevada, New Jersey, Texas, or Washington D.C., or the goods being purchased are originating from one of the aforementioned states and the buyer chooses to arrange their own shipping.

Payments received by the buyer will be processed using a secure server. When arranging your own shipping, you or your agents are responsible for the unit count of the Assets and verification of Assets purchased prior to removal from our facility. If the Assets are not acceptable for any reason, immediately inform a Liquidity Services employee prior to removal because claims cannot be made after removal in these circumstances. Alternatively, when you pay Liquidity Services to arrange shipping, you may make a claim for any incorrect or inaccurate Listing description of the Assets within two (2) Business Days after delivery of the Assets. Thereafter, a buyer's right to make a claim expires.

For international shipments, all duties and taxes are the sole responsibility of the buyer, and the buyer must furnish broker information at the time of payment. If the buyer does not have a broker, we will facilitate the clearance of the merchandise for a fee.

By bidding on this auction, you acknowledge that you have read and understand the condition of this merchandise provided in the Asset Information Section of this listing.